INCONEL® Alloy 625

2.4856  /  UNS N06625

A nickel-chromium-molybdenum alloy with an addition of niobium that acts with the molybdenum to stiffen the alloy's matrix and thereby provide high strength without a strengthening heat treatment. The alloy resists a wide range of severely corrosive environments and is especially resistant to pitting and crevice corrosion. Used in chemical processing, aerospace and marine engineering, pollution-control equipment, and nuclear reactors.

Stock program

Bars

  • 8.0 mm
  • 10.0 mm
  • 12.0 mm
  • 16.0 mm
  • 20.0 mm
  • 25.0 mm
  • 30.0 mm
  • 35.0 mm
  • 40.0 mm
  • 45.0 mm
  • 50.0 mm
  • 60.0 mm
  • 70.0 mm
  • 80.0 mm
  • 90.0 mm
  •  

Sheets / Plates

  • 0.5 mm
  • 0.6 mm
  • 0.8 mm
  • 0.9 mm
  • 1.0 mm
  • 1.2 mm
  • 1.5 mm
  • 2.0 mm
  • 3.0 mm
  • 4.0 mm
  • 5.0 mm
  • 6.0 mm
  • 8.0 mm
  • 10.0 mm
  • 12.0 mm
  •  

Tubes / Pipes

outside diameter x wall thickness

  • 6.00 mm
  • x
  • 1.00 mm
  • 10.00 mm
  • x
  • 1.50 mm
  • 12.00 mm
  • x
  • 1.50 mm
  • 17.10 mm
  • x
  • 2.31 mm
  • 21.34 mm
  • x
  • 2.11 mm
  • 21.34 mm
  • x
  • 2.77 mm
  • 21.34 mm
  • x
  • 3.73 mm
  • 26.67 mm
  • x
  • 2.87 mm
  • 26.67 mm
  • x
  • 3.91 mm
  • 33.40 mm
  • x
  • 1.65 mm
  • 33.40 mm
  • x
  • 2.77 mm
  • 33.40 mm
  • x
  • 3.38 mm
  • 33.40 mm
  • x
  • 4.55 mm
  • 42.16 mm
  • x
  • 2.77 mm
  • 42.16 mm
  • x
  • 3.56 mm
  • 48.26 mm
  • x
  • 2.77 mm
  • 48.26 mm
  • x
  • 3.68 mm
  • 48.26 mm
  • x
  • 5.08 mm
  • 60.32 mm
  • x
  • 2.77 mm
  • 60.32 mm
  • x
  • 3.91 mm
  • 76.10 mm
  • x
  • 3.05 mm
  • 88.90 mm
  • x
  • 3.05 mm
  • 88.90 mm
  • x
  • 5.49 mm
  • 88.90 mm
  • x
  • 7.62 mm
  • 114.30 mm
  • x
  • 3.05 mm
  • 114.30 mm
  • x
  • 6.02 mm
  • 114.30 mm
  • x
  • 8.56 mm
  • 141.30 mm
  • x
  • 3.40 mm
  • 168.30 mm
  • x
  • 3.40 mm
  • 168.30 mm
  • x
  • 7.11 mm
  • 219.10 mm
  • x
  • 3.79 mm
  • 219.10 mm
  • x
  • 8.18 mm

Contact Persons

Downloads

Limiting
Ni min. 58.00 %
Cr   20.00 - 23.00 %
Mo   8.00 - 10.00 %
Nb¹   3.15 - 4.15 %
Fe max. 5.00 %
C max. 0.10 %
Mn max. 0.50 %
Si max. 0.50 %
S max. 0.015 %
Al max. 0.40 %
Ti max. 0.40 %
P max. 0.015 %
Co² max. 1.00 %

¹ Plus Ta
² If determined

Density
g/cm³   8.44
lb/in³   0.305
Recommended Welded Products
Electrode INCONEL 112
Filler Metal INCONEL 625